Using your device’s mobile data as a hotspot for multiple other devices can be very useful when Wi-Fi is not available and someone needs to share a large data package. iPhone has an easy-to-set-up personal hotspot feature that turns your device into a mobile Wi-Fi router using mobile data. Unfortunately, Personal Hotspot does not seem to work for some iPhone users. We decided to look at some possible solutions and present them to you below.
Table of contents :
- Restart the device and turn off Wi-Fi.
- Make sure you enter the correct data
- Make sure your device has a stable cellular connection.
- Updating your device
- Resetting Network Settings
How do I get my personal hotspot working on my iPhone?
The procedure is generally quite simple. Settings > Mobile > Personal hotspot > Allow others to connect > Connect and enter the password when prompted. However, if you have trouble connecting, restart your phone, turn off Wi-Fi, update the firmware, or reset the network settings.
First check if the device has been rebooted. These minor problems and system malfunctions can be fixed by a simple reboot. Of course, for obvious reasons, you should check that you have sufficient cellular data. In addition, Personal Hotspot enables connections from devices that share your AppleID. If the device you are trying to connect to does not have an Apple device, do the following:
- Open the settings.
- Cellular communications.
- Turn on cellular data.
- Tap Personal hotspot.
- Activate the option Let others participate.
- Only Wi-Fi and/or USB can be used for data exchange, but the invitation also asks to use Bluetooth. The choice is yours.
- Use the password to connect to your SSID access point, which is usually :username : iPhone. In my case, it’s Alexander’s iPhone, as shown in the screenshot above.
You can also try turning off Wi-Fi when using a personal cellular data access point. Under normal circumstances, this shouldn’t be a problem, but to fix it, make sure Wi-Fi is turned off.
The device will automatically give you a Wi-Fi password, and that’s usually an alphanumeric jumble that can easily be entered incorrectly. Therefore, make sure that the password you entered on the connected devices is also present on your device.
To make it even easier in the future, you can change it to something less difficult and make it easier to connect new devices. However, if you are sure that the password is correct, but Personal hotspot still does not work on your iPhone, go to the next step.
That goes without saying. Verify that you are connected to the network via cellular data by running tests in network applications. If everything works and Personal hotspot is the exception, go to the next step.
However, if you have cellular data connection issues throughout the system, follow these steps:
- Contact your service provider (usually the application or shortcuts you enter) and ask them for the configuration file. Once you get the configuration message, you need to save the settings.
- Remove and reinsert the SIM card.
- Make sure flight mode is off.
- If you have two SIM cards, select the SIM card that is best for mobile data.
That complete mystery may be a bug, and while iOS isn’t usually full of serious bugs, one or two may remain under the radar. Fortunately, there are regular patches available. So if you make sure your device is running the latest version of iOS, you can expect the issue to be fixed.
Learn how to manually check for iPhone updates:
- Open the settings.
- Select General.
- Click on Software Updates.
- Download and install all available updates.
Finally, if none of the above steps solved the problem, you can try performing a network reset. Compared to resetting all settings or even restoring the iPhone to factory settings (which also erases internal memory), this is a targeted troubleshooting step that only affects network-related settings.
Note that you will lose SSIDs and Bluetooth connections while the default APN and VPN settings are restored. Find out how to reset your iPhone’s network settings:
- Open the settings.
- The press in general.
- Select Reset.
- Tap Reset Network Settings.
- Enter the password or PIN and confirm the selection.
Then try setting up the Personal Hotspot again and see if there are any improvements. If Personal Hotspot still doesn’t work on your iPhone, don’t forget to submit a ticket to Apple Support.
Here’s how. Thank you for reading and feel free to share your thoughts on this issue. If you have any questions or alternative solutions, please find the comment section below.
frequently asked questions
Why is my private hotspot not working on my phone?
Make sure the Mobile Hotspot or Mobile Smartphone Hotspot is activated. Make sure the Wi-Fi device you want to connect to is turned on. … Restart the devices you are trying to connect to the access point. Delete the Wi-Fi profile of the device you want to connect to and add it again.
How do I get my private hotspot up and running?
To connect to Android OS via Bluetooth or a USB port, go to Settings > Network & Internet > Access Point & Tethering and turn on the corresponding switch, then connect to another device.
How do I make a personal hotspot available on my iPhone?
On the device you want to connect to, go to Settings > Wi-Fi and search for iPhone or iPad in the list. Then tap the Wi-Fi network to connect. Enter your personal hotspot password when prompted.
Feedback,personal hotspot not working iphone,personal hotspot not working ios 13,personal hotspot not working ios 14,iphone hotspot not working windows 10,iphone hotspot connected but no internet,can’t connect to iphone hotspot,Privacy settings,How Search works,Skyroam Solis Lite,Verizon Jetpack MiFi 8800L,TP‑LINK M7350,NETGEAR Nighthawk M1,Inseego MiFi 8000,Skyroam Solis,See more,to enable personal hotspot on this account contact carrier,why is my hotspot not working on other devices