Your computer is constantly updating itself, and it doesn’t always work correctly. If you’re having trouble with Windows Update – an error code 0x80070020 – there are a few things you can try to fix the problem.

When you try to update your Windows 10 machine to the latest version, you might be greeted by an error message like the one below. The error is a bit cryptic but it says that the update cannot be installed because it requires a newer version of Windows 10.

I had to turn off automatic updates for my Windows 8.1 computer last week when the Windows Update (GWU) stopped working. Even though I am using Windows 10, I wanted to try setting up the GWU again because I got used to relying on it. I did this through Windows Update and it ran fine.

Windows updates bring in new features, security patches, and driver updates; therefore, keeping the system updated is essential. Sometimes, the Windows update error can prevent you from downloading and installing updates. Users have experienced error 0x80070020 while updating Windows. In most cases, this error is because of software interference, corrupted files, viruses, antivirus programs, or temporary glitches. You can conveniently get out of this issue by trying out some solutions.

10 Solutions to Fix Error 0x80070020

You can go through the solutions given below to eliminate error 0x80070020 and update Windows 10 without any issues.

1. Restart Windows Computer

If a Windows update error is because of temporary glitches, the easiest way to fix it is to restart your PC. Press the Windows button from your keyboard and click on the Power icon in the Start menu. Click on the Restart option. ” alt=”Restart your PC to fix error 0x80070020″ data-ezsrc=”http://server.digimetriq.com/wp-content/uploads/2021/05/10-Solutions-To-Fix-Windows-Update-Error-0x80070020.png” />Restart your PC Post the restart, check if you can complete the update process without any errors and issues.

2. Run Windows Update Troubleshooter

Windows inbuilt troubleshooters can help you fix many issues conveniently. You can run a built-in Windows update troubleshooter to fix error code 0x80070020 from your PC. Press Windows key + I to open the Settings app and go to Update & Security. In Update & Security, go to the Troubleshoot section from the left panel. Scroll down and click on Additional troubleshooters” alt=”Click on Additional troubleshooters” data-ezsrc=”http://server.digimetriq.com/wp-content/uploads/2021/05/1621852576_989_10-Solutions-To-Fix-Windows-Update-Error-0x80070020.png” />Click on Additional troubleshooters On the next window, find and click on Windows Update. You can then click on the Run the troubleshooter button to start with the troubleshooting. ” alt=”Run Windows Update troubleshooter to fix error 0x80070020″ data-ezsrc=”http://server.digimetriq.com/wp-content/uploads/2021/05/1621852577_105_10-Solutions-To-Fix-Windows-Update-Error-0x80070020.png” />Run Windows Update troubleshooter Now, let Windows scan and fix the error message for you.

3. Run BITS Troubleshooter

If the Windows update troubleshooter was not helpful, you could try running the Background Intelligent Transfer Service (BITS) troubleshooter. To do so, follow the simple steps given below. Unlike other troubleshooters, the BITS troubleshooter is available in the Control Panel app. Search and open the Control Panel from the Start menu. In the Control Panel, search for troubleshooting in the search box and open the Troubleshooting section from the search results. In the Troubleshooting section, click on View all from the left frame of the window.” alt=”Click on View all” data-ezsrc=”http://server.digimetriq.com/wp-content/uploads/2021/05/1621852578_201_10-Solutions-To-Fix-Windows-Update-Error-0x80070020.png” />Click on View all Now, right-click on the Background Intelligent Transfer Service and select Run as administrator from the context menu.” alt=”Run BITS troubleshooter as administrator” data-ezsrc=”http://server.digimetriq.com/wp-content/uploads/2021/05/1621852579_960_10-Solutions-To-Fix-Windows-Update-Error-0x80070020.png” />Run BITS troubleshooter as administrator Enter the administrator credentials and let the troubleshooting begin. Windows will find and fix all the issues that caused error 0x80070020.

4. Disable Third-party Antivirus

As mentioned above, the antivirus software can interrupt the Windows update process on your PC. You can disable it temporarily to get rid of the error 0x80070020 and update Windows. Every third pagetrty antivirus program has a different way of disabling it; you can refer to the online manual/guide to do it correctly. If the error vanishes after disabling the antivirus program, you can look for other malware removal tools or get in touch with the support team to resolve the problem.

5. Run DISM and SFC Scan

The corrupted system files can cause too many issues with your PC, including error 0x80070020. You can use Windows inbuilt utilities like SFC (System File Checker) and DISM (Deployment Image Servicing and Management) to fix the damaged system files. To use the utility, follow the instructions below. Type cmd in the Start menu’s search box and select Command Prompt from the search results. Click on Run as administrator from the context menu. ” alt=”Run Command Prompt as administrator” data-ezsrc=”http://server.digimetriq.com/wp-content/uploads/2021/05/1621852580_869_10-Solutions-To-Fix-Windows-Update-Error-0x80070020.png” />Run Command Prompt as administrator In the Command Prompt window, type sfc /scannow and press Enter to execute it. The command execution may take type, do not close the terminal window in between the scan. Once the SFC is done, perform a DISM scan by executing the following command – dism /online /cleanup-image /restorehealth” alt=”” data-ezsrc=”http://server.digimetriq.com/wp-content/uploads/2021/05/1621852581_260_10-Solutions-To-Fix-Windows-Update-Error-0x80070020.png” />Execute dism command Post this, reboot your computer and check if you can update Windows OS without an error popping up on your screen.

6. Reset Windows Update Components

You can reset the Windows update component to get rid of the troublesome Windows error. The resettings are done using Command Prompt terminal. Open Command Prompt as administrator, type in the following command one by one, and press Enter after each command to execute it. net stop bitsnet stop wuauservnet stop msiservernet stop cryptsvcren %systemroot%SoftwareDistribution SoftwareDistribution.oldren %systemroot%system32catroot2 catroot2.oldnet start bitsnet start wuauservnet start msiservernet start cryptsvc The above commands will rename the catroot2 folder and SoftwareDistribution folder so that you can do a fresh download of the Windows update. In this way, you can get rid of corrupted update files. The services like Windows Update Service, BITS, Cryptographic, and MSI Installer will also be restarted. This will fix the issue caused by Windows update components. Restart your computer after all the commands are executed and check if you can use the feature update again or not.

7. Check for Virus and Malware

The virus and malware residing in your computer can cause much more damage than expected. You can scan for viruses using Windows Defender Security if you have disabled your third-party antivirus software. Step 1: Open the Settings app and go to Update & Security. Step 2: Open the Windows Security section from the left panel. Step 3: Now, under Protection areas, click on Virus & threat protection.” alt=”Open Virus & threat protection” data-ezsrc=”http://server.digimetriq.com/wp-content/uploads/2021/05/1621852582_825_10-Solutions-To-Fix-Windows-Update-Error-0x80070020.png” />Open Virus & threat protection On the next window, click on the Scan options link. Select Full scan from the list of scans available and then click on Scan now button.” alt=”” width=”981″ height=”761″ data-ezsrc=”http://server.digimetriq.com/wp-content/uploads/2021/05/1621852583_819_10-Solutions-To-Fix-Windows-Update-Error-0x80070020.png” />Perform a Full scan Windows will scan and remove the virus from your computer. After scanning, check if the error 0x80070020 goes away or not.

8. Check Disk Errors

The issues with the disk can cause the error 0x80070020 in Windows 10. You can use the chkdsk command to fix the bad sectors in the system hard drive. Make sure you close all the unsaved files and applications before executing the command, as your system will restart to check the disk for errors. Open Command Prompt with administrator privileges and type in the below command. chkdsk C: /f /x /r” alt=”” data-ezsrc=”http://server.digimetriq.com/wp-content/uploads/2021/05/1621852584_97_10-Solutions-To-Fix-Windows-Update-Error-0x80070020.png” />Execute the chkdsk command The C in the command is the drive where the Windows operating system is installed. If your system drive has some other letter, replace C with that letter. After your PC restarts, check if you can perform a Windows update.

9. Perform a Clean Boot

Some software can interfere with the Windows update and prevent it. You can perform a clean boot to find the culprit. Type msconfig in the Start menu and open System Configuration from the search results. In the System Configuration window, go to the Services tab and check the checkbox next to ‘Hide all Microsoft services.’ Click on Disable all button to disable all third-party software and services.  ” alt=”Disable third-party apps and services to fix error 0x80070020″ data-ezsrc=”http://server.digimetriq.com/wp-content/uploads/2021/05/1621852585_58_10-Solutions-To-Fix-Windows-Update-Error-0x80070020.png” />Disable third-party apps and services Now, go to the Startup tab and click on Open Task Manager.” alt=”Open Task Manager” data-ezsrc=”http://server.digimetriq.com/wp-content/uploads/2021/05/1621852586_96_10-Solutions-To-Fix-Windows-Update-Error-0x80070020.png” />Open Task Manager In the Task Manager, ensure you are in the Startup tab. Select the application which is not required on startup and click on Disable.” alt=”Disable Startup programs to fix error 0x80070020″ data-ezsrc=”http://server.digimetriq.com/wp-content/uploads/2021/05/1621852587_844_10-Solutions-To-Fix-Windows-Update-Error-0x80070020.png” />Disable Startup programs Reboot your PC and check if you can update without any error. If the error vanishes in a clean boot environment, enable the programs one by one to find the troublemaker. It may take time to track down the software causing the issue, but you will get rid of the 0x80070020 error.

10. Use Media Creation Tool to Update Windows

If nothing from above helped you in getting rid of Windows update error, you could use the Media Creation Tool to upgrade your computer. You need to log in using the administrator account to perform the update—download Windows Media Creation Tool from the official Microsoft website. Once the tool is downloaded, install it on your PC. Now, in the Media Creation Tool window, select Upgrade this PC now and click on Next.” alt=”Upgrade PC using Media Creation Tool to fix error 0x80070020″ data-ezsrc=”http://server.digimetriq.com/wp-content/uploads/2021/05/1621852588_453_10-Solutions-To-Fix-Windows-Update-Error-0x80070020.png” />Upgrade PC using Media Creation Tool Follow the instruction wizard to complete the upgrade.

Conclusion

The update error can prevent you from upgrading Windows and using all the new features in the update. At times the issues in previous updates are fixed in the new ones, so it is vital to keep the PC up-to-date all time. The error 0x80070020 can prevent you from downloading and installing the update. Whenever you update Windows, you can see the ‘Windows Update encountered an unknown error’ message with 0x80070020 error. Well, this error code is fixable, and the solutions mentioned above can help you fix it conveniently. Windows Users with or without technical expertise can get rid of the Windows update error quickly.Windows Update error 0x80070020 is a very annoying error that occurs when you’re trying to run an update on Windows that you don’t want. For example, if you’re trying to install an update for a security program but your computer is running out of memory and can’t download the update, the error will appear.. Read more about 0x80070020 error code and let us know what you think.

Frequently Asked Questions

How do I fix a Windows 10 update error?

Windows 10 is becoming a popular OS and is continuously getting updated with more features and new features. But as time passes by, users of Windows 10 will often encounter some problems while updating their system. Some of them are due to errors, some to compatibility issues. To fix this, we need to know how to update windows 10 in the first place. Recently, I had a problem with Windows 10 and some updates that didn’t go through. Of course, as a tech blogger, I am always discovering new cool things about my OS and love sharing them with other people. I came across a few articles that suggested that there were a few things I could do to remedy this particular problem, and the most common one was to run a troubleshooter in my command line. That is what I did and it worked!

How do I fix error 0x80240fff in Windows 10?

If you have recently been affected by the Windows 10 update error 0x80240fff, then we have the answer for you. We have a handful of solutions to help you fix this error code, which we will explain in detail in this blog. On Windows 10, the OS will occasionally encounter an error. Usually, it is something on the server side of the connection between the PCs and the update servers. However, there are times when you see the dreaded 0x80240fff error message. In this blog post, we will cover how to troubleshoot this error, as well as provide solutions to resolve this issue in Windows 10.

How do I fix error 0x80240023?

If you’re a Windows Insider and are still waiting for the latest feature update (version 1803) to roll out, you might be wondering if there’s any way to get the update early. If you check the official Microsoft support page, you’ll see that the company recommends you wait for its official release, but not everyone is willing to wait around. One way to get the new Windows build early is to use a Windows 10 Insider build from Microsoft’s internal beta program. When Windows 10 gets stuck, the usual advice is to reboot your system and try again. This is no longer possible in Windows 10 with the new roaming update system. Even if you do reboot, the system may not update, and you may be left with a corrupted system file.

Feedback,windows update troubleshooter windows 100×80070020 error codehow to fix error 0x800700200x80070020 windows 10feature update to windows 10, version 2004 – error 0x80070020feature update to windows 10 version 20h2 error 0x80004002,People also search for,Privacy settings,How Search works,feature update to windows 10, version 2004 – error 0x80070020,feature update to windows 10 version 20h2 error 0x80004002,windows update troubleshooter windows 10,0x80070020 error code,how to fix error 0x80070020,0x80070020 windows 10,installation failure: windows failed to install the following update with error 0x80070020,windows 10, version 20h2 – error 0x80070020

You May Also Like

🥇 Play Spotify on Discord  Step by Step Guide ▷ 2021

Ready to listen to your favorite music and share it on Discord,…

🥇 Install Discord on Any Device  Step by Step Guide ▷ 2021

With Discord, you can enjoy instant messaging with your friends and make…

How to Get iMessage on Android Phone

iMessage is Apple’s proprietary messaging platform for iPhone, iPad, Mac and iPod…

Fix: Can’t set Live Wallpaper on iPhone

Live wallpapers are a great way to bring your iPhone’s lock screen…